CPU-M

Product

Electrical box with ‘Millennium 3’ controller

Variations:

• CPU-M 5,5 kW:
  • operating pressure  from min. 70 up to max. 130 bar
  • water throughput: max. 2460 up to min. 1260 l/h
• CPU-M 7,5 kW:
  •  operating pressure  from min. 55 up to max. 170 bar
  • water throughput: max. 6000 up to min. 1500 l/h
• CPU-M 11,0 kW:
  • operating pressure from min. 80 up to max. 210 bar
  • water throughput: max. 4200 up to min. 1260 l/h
• CPU-M 15,0 kW:
  • operating pressure from min. 80 up to max. 275 bar
  • water throughput: max. 4200 up to min. 1500 l/h

Technical

Radial high pressure pump with 3 ceramic plungers and stainless steel valves >>> fewer vibrations and less noise

A brass/nickel-plated pump head >>> no corrosion

Flexible engine/pump coupling >>> silent operation and protection of the electric motor

Low speed

Automatic start/stop system with shut-down-delay

Soft starter

Simple-section pump unit with different choices for engine/pump combinations

This simple-section unit can be delivered in various models and is suitable for the supply of cold and hot water. The standard version is equipped for water supply temperature up to 40°C. Some models are optionally suitable for higher water supply temperatures by using an HT pump. (Note: when using an HT pump, always use a pre-pressure pump and reduce the speed if necessary)

Stainless steel frame

130 l stainless steel float tank

Mechanical valve

Coarse particle filter

Pressure gauge

Level monitoring

Dry-run protection

Temperature security system up to 40 °C or optional up to 85 °C (when using HT pumps)

Protected against breaks in the pipes and overpressure

Note: when using an HT pump, always use a pre-pressure pump and reduce the speed if necessary.